Advanced Route Optimisation (Group Driver Routing)

 

Routing allows you to optimize the job runs of both individual and groups of drivers from a chosen start and finish location, in order to provide drivers with their least kilometre run for their set of jobs in the shortest efficient route using live and future predicted traffic.

Advanced Route Optimisation allows for unallocated jobs to be spread across a number of drivers in order to reduce kilometres spent on the road based on set logic.

Step 1

Start by uploading jobs into Radaro in an "unassigned" state. Multiple ways on how to upload jobs can be found here.

Once uploaded, click on the Optimiser Button (1) to open the Optimisation screen. This screen displays all optimisations past, present and future. Click on "New Optimisation" (2) to start a new optimisation.

1-EDITED.png

Step 2

In the optimisation screen, start by selecting the date for your optimisation (1).

 

2-EDITED.png

 

  1. Date - Select date of optimisation
  2. Jobs - You can choose to optimise select jobs by deselecting or filtering. All jobs are selected by default.
  3. Drivers - Select the number of drivers you are optimising for the run. 
  4. Working Hours - Select the desired delivery/service window. For the best results, "tightening" this window will allow an efficient optimisation. Note: Beware to not over-tighten the windows. This could result in the optimising engine excluding work orders that cannot be executed in the given time frame. 
  5. Service Time - Select the determined on-site dwell time for each work order. 
  6. Start/End Hub - Select a start and end location for the route. You can also select a "Driver Default Hub" for instances when a driver starts or finishes their day at a dedicated stop location (i.e. home).
  7. Vehicle Capacity - Check this box if you use the vehicle capacity function in Radaro. Capacity allows you to optimise runs based on the capacity of the driver's vehicle, effectively preventing overloading goods in the vehicle. 

Once you've set the desired optimisation logic, click on "Optimise Jobs" to create the optimisation. 

Step 3

Optimisation will take a few seconds to minutes, depending on the number of jobs and drivers. The optimisation progress will be displayed in the window until complete. 

 

_3.png

 

Once complete, you will be presented with the optimisation results for review. 

4.png

Step 4

You will be able to click on each driver's icon to review their route and suggested time windows. You can also delete the optimisation should you decide to make any changes (Fig2). 

 

Screen_Shot_2021-01-18_at_2.49.50_pm.png   

Fig1

5-EDITED_copy.png

Fig2

Step 5 

If you are satisfied with the optimisation results, you may choose to send upcoming delivery/service notifications to customers, based on the optimisation. Click on the "Notify Customers" button to trigger notifications. 

 

6-EDITED.png

 

And you're done! The route will now be pushed through to each drivers’ device so they can begin executing work orders.

Note: Drivers will not be able to view the optimised route on the driver app until the day of execution. 

 

If you are interested in learning more about Group Route Optimization or how it can be integrated into your operations, contact your Radaro Account Manager or a member of the Radaro team at (03) 8548 1892 or by emailing support@radaro.com.

Was this article helpful?
1 out of 1 found this helpful